510 Upgrade and Maintenance Manual TX2550 M4
iRMC-related status signals
I For more information, see section "Updating or recovering the iRMC" on
page 111.
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC Firmware 7.14 or later
– supported OOB RAID system
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
blue flashing orange flashing
An emergency flash of the iRMC firmware
is in progress.
To Next Page
Loading...
