Video Mix/Effects
Source Memory
88
Source Memory settings for a keyer source are only applied when that source is selected on
that keyer bus. Selecting on that keyer bus a different source that does not have learned
Source Memory will restore the previous keyer settings.
Source Memory keying settings include:
• Keyer Mode settings, including Preset Pattern and Chroma
• Keyer Mask settings
• Keyer and Wipes Mattes settings
• M/E Video Proc settings (Keyer sources only)
• M/E RGB Color Correct (Keyer sources only
• Wipes settings (Keyer sources only)
Source Memory settings are explicitly learned and deleted, using the
Source Memory
button.
The following are NOT affected by Source Memory:
• Split keys
• Keyer Borderline settings
• Keystore settings
• Background sources
• Aux sources
Learn Source Memory for a Keyer
1 Select a source on a keyer bus and setup the keyer with the desired settings, using the
Control Panel and/or menus.
2 Go to the Keyer/Mode menu and select the keyer whose settings you want to save to
that keyer source’s Source Memory.
3 Select the
Source Memory button. The Source Memory window appears (selecting
Cancel exits the Source Memory window without making any changes).
To Next Page
Loading...
