Kayenne/Karrera/GV Korona
User Manual
89
4 Select the Learn button. The settings are saved for that keyer source on that M/E’s keyer
bus, and will be applied whenever that source is selected on that M/E’s keyer bus.
When a keyer source with settings saved to Source Memory is selected on a keyer bus, the
Source Memory button is highlighted when that keyer is selected in the Keyer Mode menu.
Delete Source Memory from a Keyer
1 Select a keyer source with learned Source Memory on a keyer bus, using the Control
Panel and/or Source Ops menu.
2 Select Keyer, Mode in the menu, and select that keyer. The
Source Memory button will
be illuminated.
3 Select the
Source Memory button. The Source Memory window appears.
4 Select the Delete button. The Source Memory delete options window appears.
5 Select one of the following Source Memory delete options:
To Next Page
Loading...
