5.7 Setting Environment Conditions
125
5
Chapter 5 Setting Measurement Conditions
This section describes setting the display method for the time values of mea-
surement data handled by the instrument. Set the display method for the time
values shown when using the HTTP function (p. 209) to obtain internal memory
data in text format.
5.7.3 Time Value Display
Selectable
Items
Explanations
Time
Display the time since the start of measurement in hours, minutes, and
seconds. If a trigger is set, the time since the trigger.
Date Display the date and time the data was obtained.
Point
Display the number of data items since the start of measurement. If a trig-
ger is set, the number of data items since the last trigger point.
To Next Page
Loading...
