Hioki 8423 - Chapter 8 Saving and Reading Data

7.6 Searching for the Maximum Value, Minimum Value, and Variation
155
7
Chapter 7 Analyzing Measurement Data
This section describes searching for the maximum value, minimum value, variation, etc.
1. Click the [Search] tab on the right side of the main screen to open the settings window.
2. Select the search range.
7.6 Searching for the Maximum Value, Minimum
Value, and Variation
Selectable Items Explanations
Whole Range
Search the whole range of the recorded waveform.
Between A-B
Search the waveform portion between cursor A and cursor B of the
recorded waveform.
When you are just using either cursor A or cursor B, the search range is
from the cursor to the end of the waveform.
(1) Click
(2) Select
Search range
Search range
Cursor A Cursor B
Search range
Cursor A or cursor B