Hioki 8423 - 12.2 Application Software

11.3 Current Value Display
211
9
Chapter 11 Communications (HTTP/FTP)
11
1. Click [CURRENT DATA DISP] on the settings screen. The screen below will
be displayed.
• You can display numerical values of the data being measured by the instru-
ment.
• You can monitor the data obtained for each channel at the recording interval
while the instrument is measuring.
• You can even monitor the instantaneous data input to each channel while
measurement is stopped on the instrument.
2. To change the screen's renewal rate, set with [DATA RENEWAL TIME].
11.3 Current Value Display