Hioki 8423 - Saving and Reading Setting Data; Saving Setting Data; Reading Setting Data

8.2 Saving and Reading Setting Data
170
You can save the settings configured with Logger Utility and the display settings.
It is also possible to read set data. (Extension: .LUS)
1. Click [Save Setting File] from the File menu to display the Save Setting File
dialog box.
2. Specify the location to save the file and enter a file name.
3. Click the [Save] button.
1. Click [Open Setting File] from the File menu to display the Open Setting
File dialog box.
2. Select the file to read, and click the [Open] button.
8.2 Saving and Reading Setting Data
Measurement waveforms are not included in setting data.
8.2.1 Saving Setting Data
(1) Input
(2) Click
8.2.2 Reading Setting Data
(1) Click
(2) Click