Hioki 8423 - Chapter 3 Setting Up the Instrument; Installation and Connection Procedure

31
7
3
Chapter 3 Setting Up the Instrument
This section describes preparations for starting measurement.
Installation and Connection Procedure
Setting Up
the Instrument Chapter 3
Before connecting the instrument to a computer or network, install Logger Utility
while referring to "Chapter 2 Installing the Software" (p. 17).
(1) Attaching units (p. 32)
(2) Connect the input cables to the units (p. 35)
(3) Installing the Memory HiLogger (p. 40)
(4) Connecting the AC adapter (p. 42)
(5) Connecting a communication cable (p. 43)
(6) Inserting a CF card (p. 46)
(7) Connecting synchronization cables (p. 48)
(8) Connect the cables to the external control input terminals (p. 50)
(9) Turning the power on (p. 52)
When performing
synchronized
measurement
When performing
external control