11.5 Data Acquisition using FTP
213
9
Chapter 11 Communications (HTTP/FTP)
11
• You can use FTP to obtain files in the CF card and measurement data in inter-
nal memory of the instrument.
• It is not possible to obtain measurement data in internal memory during mea-
surement. You can, however, obtain the data after measurement stops.
1. Click [DATA GET BY FTP] on the settings screen. The screen below will be
displayed.
2. Click [FTP DATA GET FROM CARD & MEMORY]. You can retrieve the
instrument's CF card files and the data containing measurements in inter-
nal memory from the web using FTP.
3. If [FTP/HTTP Authentication] is [ON] on the instrument's Comm screen,
you are asked for your user name and password. Enter your user name
and password and click [Set].
11.5 Data Acquisition using FTP
• Operation using the FTP server is not possible while measurement is being
performed with Logger Utility.
• The updating of the screen (indications for the clock, measurement values,
and number of measurement data items) of the instrument may stop tempo-
rarily while data is being sent from the instrument to the computer, but the
instrument clock and internal operations for measurement are not affected.
To Next Page
Loading...
