12.1 General Specifications
215
Chapter 12 Specifications
12
Basic Specifications
Specifications Chapter 12
12.1 General Specifications
Power Supply Using the 9418-15 AC Adapter
Rated supply voltage: 100 to 240 VAC
Aated supply frequency: 50/60 Hz
Anticipated transient overvoltage: 2500 V
External DC power supply: 9.6 V to 15.6 VDC
Maximum rated power Using the 9418-15 AC Adapter: 55 VA (AC adapter included),
20 VA (instrument only) [When 8 units are connected]
When using an external DC power supply: 20 VA [When 8 units are connected]
Maximum Number of Units Up to 8 units can be connected (total number of 8948 Voltage/Temp Units, 8949 Uni-
versal Units, 8996 Digital/Pulse Units, and 8997 Alarm Units)
Memory Capacity 16M Words (total)
Recording Interval 10 ms, 20 ms, 50 ms, 100 ms, 200 ms, 500 ms,
1 s, 2 s, 5 s, 10 s, 20 s, 30 s,
1 min, 2 min, 5 min, 10 min, 20 min, 30 min,
1 h
Recording Period Any recording period or continuous can be set
Recording Settings Continuous recording, repeat recording, and timer measurement can be set
Recording Data Quantity Analog n channel recording period (16 M/n) data
Data Storage The last 16M of data (when recording with 1 channel) is saved to internal memory
(16/n data when recording with n channels)
Backup Battery and Life
Time and Settings: Approx. 10 years (at 23°C/73°F)
Clock Auto calendar with automatic leap year, 24-hour clock
Clock Accuracy : Power ON ± 0.2 s/ day, Power OFF ± 3 s/ day
Time Axis Accuracy : During measurement ± 0.2 s/ day (at 23°C/73°F)
External Control Input
Terminals
• External sampling input/trigger input (exclusive use)
• External start input
• External stop input
•GND
Size Approx. 67W x 133H x 125D mm (2.64”W x 5.24”H x 4.92”D)
(not including protrusions)
Weight Approx. 600 g (21.2 oz.)
Applying Standards Safety EN61010
EMC EN61326 Class A
EN61000-3-2
EN61000-3-3
To Next Page
Loading...
