10.12 Displaying Individual Version Information
205
Chapter 10 Setting Method for Logger
10
This section describes displaying the MAC address of the instrument.
1. Turn the power on while pressing
and then release the key
when the model name and version
appear in the display area.
The instrument enters setting mode.
2. Press multiple times until the following MAC address screen
appears.
3. Confirm the version.
4. Press multiple times until the following setting mode end screen
appears.
5. Press to end setting mode.
10.12.3 MAC Address
(The figure indicates that the unique MAC address set
for the instrument is 000167-020977)
To Next Page
Loading...
