5.8 Send Settings
127
5
Chapter 5 Setting Measurement Conditions
When you want to use just the logger for measurement without using a computer
(standalone), send the settings to the logger beforehand.
1. Configure the settings in "5.1 Registering Loggers in Logger Utility" to
"5.7 Setting Environment Conditions".
2. Click the [Send] button.
5.8 Send Settings
• It is not possible to send the settings for a logger that is already measuring.
• There is no need to send the settings if you are using Logger Utility for control,
because the settings are sent automatically at the start of measurement.
To Next Page
Loading...
