2.2 Installing the USB Driver
21
2
Chapter 2 Installing the Software
Install the USB driver before you use the instrument with a USB connection.
1. Install the driver.
Run [SetupDriver32.msi] in the CD-R.
If [Logger Utility] is already installed, run the CD from the following location.
[c:\Program Files\HIOKI\LoggerUtility\Driver\SetupDriver32.msi]
If you are using the WindowsVista/7 64bit version:
[c:\Program Files(x86)\HIOKI\LoggerUtility\Driver\SetupDriver64.msi]
Run [SetupDriver64.msi] in the CD-R.
If [Logger Utility] is already installed, run the CD from the following location.
[c:\Program Files\HIOKI\LoggerUtility\Driver\SetupDriver64.msi]
2. Click [Next].
2.2 Installing the USB Driver
Depending on the environment, the dialog box may take some time to appear so
please wait till it does so.
To Next Page
Loading...
