Hioki 8423 - 5.1 Registering Loggers in Logger Utility

5.1 Registering Loggers in Logger Utility
64
This section describes registering loggers in Logger Utility, and configuring the
connection settings for communication. There are two methods for registering
loggers: searching for loggers connected to the computer and then registering
them, or configuring settings manually. The search and register method can be
used for a logger connected to the computer by a USB cable or a logger con-
nected to the same network by a LAN cable. Searching is not possible if the net-
work is split by, for instance, a router during LAN communication. In such a case,
register loggers manually. (p. 68)
Search for loggers connected to the computer, and register the loggers for mea-
surement from the found loggers. Up to 256 loggers can be found, and up to 5 of
them can be registered. Connect the computer and loggers by LAN cable or
USB cable beforehand.
1. Start Logger Utility.
2. Click the button in the main screen to display the connection set-
tings page of the settings screen.
5.1 Registering Loggers in Logger Utility
5.1.1 Searching and Registering