10.1 Setting Method
186
Enter setting mode on the instrument by turning the power on while pressing
, waiting for the model name and version to appear in the display area,
and then releasing the key. Pressing toggles the setting items as shown
below.
Display Switching Order
10.1 Setting Method
ROM Version
FPGA Version
Zero Adjustment
Synchronized Measurement
Date
Time
DHCP
IP Address
Subnet Mask
Port Number
Gateway
MAC Address
Serial No.
ROM Check
RAM Check
BUS Check
Key Check
LED Check
LCD Check
Reading a Setting File
Writing a Setting File
Version Update
Setting mode end
(Returns to ROM Version Indication)
(p. 203)
(p. 204)
(p. 234)
(p. 187)
(p. 188)
(p. 189)
(p. 190)
(p. 191)
(p. 192)
(p. 193)
(p. 194)
(p. 205)
(p. 206)
(p. 197)
(p. 198)
(p. 199)
(p. 200)
(p. 201)
(p. 202)
(p. 208)
(p. 207)
( p. A 2)
Language
(p. 196)
Operations such as starting measurement are not possible while the instrument
is in setting mode. Press multiple times until the setting mode end screen
appears, and then press to end setting mode.
To Next Page
Loading...
