10.10 Display Language
196
This section describes setting the display language of the instrument.
1. Turn the power on while pressing
and then release the key
when the model name and version
appear in the display area.
The instrument enters setting mode.
2. Press multiple times until the following display language setting
screen appears.
3. Press to select Japanese or English.
Each press of the key toggles the selection item.
4. Press to move the flashing cursor to [SET], and press to con-
firm the setting.
5. Press multiple times until the following setting mode end screen
appears.
6. Press to end setting mode.
10.10Display Language
To Next Page
Loading...
