10.12 Displaying Individual Version Information
203
Chapter 10 Setting Method for Logger
10
This section describes displaying the ROM version.
1. Turn the power on while pressing
and then release the key
when the model name and version
appear in the display area.
The instrument enters setting mode.
2. Press multiple times until the following ROM version screen
appears.
3. Confirm the version.
4. Press multiple times until the following setting mode end screen
appears.
5. Press to end setting mode.
10.12 Displaying Individual Version Information
10.12.1 ROM Version
(The figure indicates that the ROM version of the
instrument is 1.00.)
To Next Page
Loading...
