Hioki 8423 - Process All

5.9 Process All
128
You can copy the setting information for any channel and paste it to other chan-
nels. This function is available on the following pages.
1. If you want to copy the settings information to other channels, select
[Copy], and click the [Execute] button after selecting the copy source
channel.
2. Select the parameters to copy and copy destinations, and then click
[Copy].
5.9 Process All
Setting Pages Copy
Copy to Other
Sheets
Reset Waveform Position
Measurement settings page of
the channel settings
Yes No No
Waveform calculation setting
page of the channel settings
Yes No No
Channel settings page of the
channel settings
Yes No No
Sheet settings page of the
channel settings
Yes Yes Yes
Trigger settings page
Yes No No
Alarm settings page
Yes No No
Environment settings page
Yes No No
(2) Select
(4) Click
(1) Click
(3) Select
Selectable
Items
Explanations
Select All Select all the parameters to copy or copy destinations.
Unselect Clear the selection for all the parameters to copy or copy destinations.
Reverse Reverse the selection for the parameters to copy or copy destinations.
(1) Select
(2) Select
(3) Click