11.4 Acquiring Data from Memory
212
1. Click [MEMORY DATA GET] on the settings screen. The screen below will
be displayed.
2. Specify and retrieve a range of data saved in the internal memory during
the instrument measurement.
You can also retrieve all of the data. You can select binary data and text data. In
addition, the data can be transferred to Excel to create graphs as desired.
11.4 Acquiring Data from Memory
• The updating of the screen (indications for the clock, measurement values,
and number of measurement data items) of the instrument may stop tempo-
rarily while data is being sent from the instrument to the computer, but the
instrument clock and internal operations for measurement are not affected.
• When data is converted to text data, the valid number of digits for numerical
data differs between the instrument and Logger Utility. Therefore, there may
sometimes be slight discrepancies between the values of the instrument and
those of conversion results in Logger Utility due to calculation errors, espe-
cially when scaling is used. Furthermore, when the entire internal memory con-
tains measurement data, text conversion performed in the instrument may
require several hours to complete because of the calculation speed. Using
Logger Utility to convert a file obtained in binary to text is recommended.
To Next Page
Loading...
