Operating Precautions
7
Handling the Instrument
To avoid electric shock, do not remove the instrument's case. The internal
components of the instrument carry high voltages and may become very
hot during operation.
Never modify the instrument. Only Hioki service engineers should disas-
semble or repair the instrument. Failure to observe these precautions may
result in fire, electric shock, or injury.
To avoid damage to the instrument, protect it from physical shock when trans-
porting and handling. Be especially careful to avoid physical shock from drop-
ping.
This instrument may cause interference if used in residential areas. Such use
must be avoided unless the user takes special measures to reduce electromag-
netic emissions to prevent interference to the reception of radio and television
broadcasts.
Handling the Cables
• Avoid stepping on or pinching cables, which could damage the cable insula-
tion.
• To avoid breaking the cables, do not bend or pull them.
Use only the specified cables. Using a non-specified cable may result in incor-
rect measurements due to poor connection or other reasons.
Handling the CD
To Next Page
Loading...
