5.3 Configuring Basic Settings for Measurement
83
5
Chapter 5 Setting Measurement Conditions
4. Set divisible saving. Click the [Standard] button to display the [Folder Split
Settings] dialog box. Set the file save method.
Split Folder (This setting is for saving with only the Logger Utility)
YYYY: Year (2000 to 2999), MM: Month (01 to 12), DD: Day (01-31)
Auto Save Mode (This setting is for saving with both the instrument and Logger
Utility)
The auto save mode is not available when external sampling is set.
Selectable Items Explanations
Do Not Split Save
Destination
Saves files to the save location.
Split Each Day
Creates the sub-folder "YYYYMMDD" in the save location, and
saves files in that sub-folder.
Split Each Week
Creates the sub-folder "YYYYMMDD" in the save location, and
saves files in that sub-folder.
Split Each Month
Creates the sub-folder "YYYYMM" in the save location, and
saves files in that sub-folder.
Split Each Year
Creates the sub-folder "YYYY" in the save location, and saves
files in that sub-folder.
Selectable Items Explanations
Standard Creates one file per measurement.
Split
Splits the data at regular intervals from the start of measure-
ment, and creates separate files. Set the split length.
Setting range: 0 day, 0 hour, 1 minute to 30 days, 23 hours, 59
minutes
Split at Regular
Intervals
Allows a reference time to be set within a 24 hour period, splits
data at regular intervals from that reference time, and creates
separate files. Set both the split time (data split interval) and
reference time (data split reference time).
(2) Select
(1) Click
(3) Select
To Next Page
Loading...
Need help?
General
