Open the Alarms Screen 109
User Guide v 2.0 — March 2023 Heat the Mold
The Alarms screen buttons are described in Table 9-2. The Alarms screen information
columns are described in Table 9-3.
9.7.1 Open the Alarms Screen
To open the Alarms screen, do one of the tasks that follow:
• On the Home screen, touch the Alarms button.
• In the system footer, touch the Alarms Information button.
9.7.2 Alarm States
Alarm states are described in Table 9-4.
Table 9-2 Alarms Screen Buttons
Button Description
Silence Horn Stops the alarm tone.
Reset Alarms Resets the alarm light and error message.
Clear Inactive Alarms Clears the inactive alarms.
Event History Touch this button to see the Event History screen.
Table 9-3 Alarms Screen Column Items
Item Description
Number of Active
Alarms
Shows the current number of active alarms.
Date/Time Date and time that the alarm was triggered.
Source Cause of the alarm.
Description Description of the problem that triggered the alarm.
Table 9-4 Alarm States
Alarm State Description
Active When an alarm first occurs, it is assigned the active state.
Inactive Not
Acknowledged
Press the Reset Alarms button and the alarms will be assigned the
inactive not acknowledged state.
Inactive Acknowledged Press the Clear Inactive Alarms button and the alarms will be assigned
the inactive acknowledged state.
To Next Page
