Alarm Buttons 19
User Guide v 2.0 — March 2023 Altanium Operator Interface
4.1.3.4 Alarm Buttons
Refer to Figure 4-1 for the Alarm buttons location. Table 4-4 describes the Alarm button
functions.
Home
To see the Home screen.
Quick Navigation
To see a drop-down list of view buttons for products that are configured for
your system (the I/O button will always show).
Table 4-3 Navigation Buttons (Continued)
Button Description
Table 4-4 Alarm Buttons
Button Description
Silence Horn
Stops the audible alarm.
Alarm Reset
Clears the alarms that have been corrected.
Alarm Status
Shows the Alarm screen. The time and a description of the most important
active alarm is shown. If an alarm is active, the Triangle Icon (Warning)
changes to yellow and the background of the button flashes red.
To Next Page
Loading...
