EasyManua.ls Logo

Husky Altanium Delta5 - Environmental Operating Specifications; Equipment Ratings; Technical Specifications

Husky Altanium Delta5
342 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
v 2.0 — March 2023 Altanium Delta5
4 Environmental Operating Specifications
1.5 Environmental Operating Specifications
The list that follows shows the environmental operation specifications for the Altanium
Delta5 operator interface:
For Indoor use only.
Operating Temperature: 5 to 40 °C (41 to 104 °F)
Operating Humidity: 0% to 90% RH, Non-Condensing
Altitude: up to 2000 m (6562 ft)
Pollution Degree: PD2
Overvoltage Category: OVIII
1.6 Equipment Ratings
Ratings for the entire Altanium Controller can be found on the nameplate attached to the
back of the controller.
The following are the equipment ratings for the Altanium Delta5 operator interface only:
Supply Voltage: 100 to 240 VAC ±10%, single phase
Frequency: 47 to 63 Hz
Power Rating: 130 W typical
1.7 Technical Specifications
The dimensions and weight of the controller can change based on the controller
configuration.
What follows are the technical specifications for the Altanium Delta5 operator interface only:
CAUTION!
Mechanical hazard – risk of equipment damage. Falling or spraying liquid, including oil
or water, could damage the equipment. Do not spray wash.
Dimensions Weight
Width: 330 mm (13 in)
Length: 280 mm (11 in)
Height: 380 mm (15 in)
Controller: 6.8 kg (15 lb)
With shipping container: 10 kg (22 lb)

Table of Contents

Related product manuals