Husky Altanium Delta5 - Servo Control; Temperature Control Views

Servo Control 23
User Guide v 2.0 — March 2023 Altanium Operator Interface
4.1.6 Servo Control
The Servo Control panel of the Altanium Home screen gives access to installed systems, such
as the UltraSync-E, the UltraShot, or the Altanium Servo Controller. Refer to the appropriate
user guides for more information.
Table 4-8 shows the buttons for the available options that could be installed on your
Altanium system.
NOTE: The Servo Control panel will be empty if no other systems are installed.
4.1.7 Temperature Control Views
The Temperature Control Views panel of the Altanium Home screen gives access to zone
data in different formats. Touch a view button to open the related screen. Table 4-9 gives a
description of the view screens.
Table 4-8 Servo Control Options
Button Description
UltraSync-E
For more information, refer to the UltraSync-E User Guide.
UltraShot Controller
For more information, refer to the UltraShot Controller User Guide.
Altanium Servo Controller
For more information, refer to the Altanium Servo Controller User Guide.
Table 4-9 Temperature Control Views Buttons
View Button Description
Neo View
Shows the zones shown in a block format. This screen gives an easy,
overall status view of the mold, so you do not have to sort through much
data.
Multi Group View
Shows the zones organized into groups. This screen lets the user have
control of each group. Refer to Section 7.3 for more information.
Graphical View
Shows a graphical view of zone data. Refer to Section 7.4 for information.