Husky Altanium Delta5 - Zone Name

v 2.0 — March 2023 Altanium Delta5
76 Zone Name
7.8.2 Zone Name
You can give a name to each zone in the system to make it easier to find and make changes.
Use names for each zone to identify a cavity, gate, probe, manifold, some other device, or an
applicable area.
To rename a zone, do the steps that follow:
1. Touch the zone to be renamed.
2. Touch the Zone Edit drop-down tab.
3. Touch the Zone Name field and type a new zone name.
NOTE: Refer to Section 7.8.2.1 for information about how to give a name to more than
one zones.
You can also select frequently used zone names with the use of the keys that follow:
• Zone
• Probe
• Tip
• Nozzle
• Sprue
• Manifold
• Bridge
• Valve Gate
• Not Used
I-Integral This is the integral term value used by the control algorithm. Possible
values are: 0 – 250. Refer to Section 7.10.
D-Derivative This is the derivative term value used by the control algorithm. Possible
values are: 0 – 250. Refer to Section 7.10.
Table 7-15 Control Settings Fields (Continued)
Item Description