v 2.0 — March 2023 Altanium Delta5
300 Install the Dual Touch Monitor
16.4.6 Install the Dual Touch Monitor
To install the dual touch monitor, do the steps that follow:
1. If necessary, de-energize the system at the Altanium main power switch. Refer to
Figure 16-2.
2. If necessary, lock out and tag the main power switch in accordance with local codes.
3. Find and unpack the items that follow (refer to Figure 16-38):
• Secondary touch monitor with the AC/DC adapter and extension cables
• USB extension cable with signal booster
• HDMI to DVI extension cable
• DisplayPort to HDMI converter
Figure 16-37 Dual Touch Monitor Install
WARNING!
Electrical and mechanical hazard- risk of death, serious injury and/or damage to the
equipment. Turn off all power to the system and disconnect it completely from the
main input power.
To Next Page
Loading...
