User Guide v 2.0 — March 2023 System Options
Digital I/O 243
Chapter 14 System Options
The Altanium controller has many additional optional features available to help in the
molding process. There are hardware, software, and a combination of hardware and software
options that can be used to maximize the system.
14.1 Digital I/O
Use the I/O screen to configure the digital inputs and outputs. On the Home screen, touch
the I/O button.
The I/O options are divided into four categories:
• Safety
• Digital Inputs
• Digital Outputs
• Configurable Signals
The tabs at the bottom of the screen are used to access each I/O category. Table 14-1 gives a
list of items found on the I/O screens with their descriptions.
To configure the I/O, select a tab for safety, inputs, outputs, or configurable signals to see the
I/O you want. If your Altanium controller has heats and/or servos installed, the digital inputs
and outputs screens will show sub-tabs related to those features. Navigate to the I/O and
configure the settings as necessary to the requirements.
Table 14-1 Digital I/O Screen Item Descriptions
Item Description
Name The name of the input and output option.
Function A description of the input or output option.
Active Indicates if the feature is active (green) or inactive (grey).
Invert Used to manually invert the I/O condition that it is in at this time.
In Use Used to set the I/O heats options On or Off.
Level Indicates (green) if there is a signal at the physical hardware pins.
Schematic Relates to the input or output number assigned to the option.
Pins The connector pins related to each input and output.
To Next Page
