System Setup - Heats Settings 137
User Guide v 2.0 — March 2023 System Setup
4. Touch the Update Scheduled Task button to set the scheduled configuration.
10.3 System Setup - Heats Settings
Use the Heats Setup to configure all of the temperature and monitor settings for the mold.
To access the Heat Setup, touch the System Setup button on the Home screen and then
touch the Heats Setup tab at the bottom of the screen.
The Heats Setup is divided into three groups of related configuration settings, accessed with
the tabs at the bottom of the screen:
• Control Page 1
• Control Page 2
• Monitoring
The sections that follow describe the configuration settings found in each group.
Last Successful Sync
Time
A status field that lets you know the last time a successful sync occurred.
This field is updated automatically whenever the Time
Synchronization Setup
dialog is shown or whenever you update the
time manually.
Update Time Now This button is used to immediately synchronize the time with the time
server specified. It will become disabled if the Network Time Protocol
Server field is empty.
Synchronize Time This setting specifies how often to synchronize the time. Possible values
are: One Time, Daily, Weekly, or Monthly. The default value is Weekly.
Start On This setting specifies the time and date of when to start the
synchronization.
Recur Every This setting specifies how many days, weeks, or months
synchronization should occur, based on the Synchronize Time setting.
Example: If the Synchronize Time is set for "Daily", a value of 1 means
time synchronization should occur every day. The default value is 1, and
the range is 1 to 365.
Example: If the Synchronize Time is set for "Weekly", a value of 1 means
time synchronization should occur every week. The default value is 1,
and the range is 1 to 52.
Recur Weekly On/Recur
Every Month On
This section allows the user to specify which days during the week or
which day of the month that the time synchronization should occur. For
a Synchronize Time set as "Weekly", the default is Sunday. For a
Synchronize Time set as "Monthly", the default is First Day.
Update Scheduled Task Use this button to update the scheduled task configuration.
Table 10-7 Time Synchronization Setup Items (Continued)
Item Description
To Next Page
Loading...
