Screen Security - Main 1 Screen 39
User Guide v 2.0 — March 2023 Security and Administration
Remote Access Select the user role that can operate the Remote Service Assistant utility on
Network Setup screen.
Digital I/O
Configuration
Select the user role that can configure the digital I/O on the Digital I/0
screen.
Log Transfer Select the user role that can download the event log or data log in the Log
Transfer section of the System Setup screen.
Options and
Licensing
Select the user role that can load a license file that enables the options a
user has purchased.
Mold Setup Auxiliary
Actions
Select the user role that can view files (mold setups, images, txt files and
PDF documents) and operate the buttons that follow on the Files screen:
Create Folder, Delete, Copy, Paste, and Rename.
Mold Setup Load
Action
Select the user role that can load a mold setup configuration file and to
create a new mold setup configuration file on the Files screen.
Mold Setup Save
Action
Select the user role that can save changes to mold setup files and use the
Save As function on the Files screen.
System Data Selects the user role that can change the Company Name.
Date and Time Select the user role that can set the date and time.
Troubleshooting Data Selects the user role that can export diagnostic data for Husky service
personnel to troubleshoot problems.
User Management Select the user role that can use the User Management screen operations.
Data Collection Setup Select the user role that can set the data collection variables and selection.
Turn Off Display Select the user role that can set the time limit in which the touch screen
must be used. When the time limit ends the Altanium display turns off for
power conservation.
Basic Controller
Operation
Select the user role that can operate the major controller function buttons:
Stop, Start, Standby, and Boost. Stop is always available. This setting also
grants permission to operate the UltraSync-E control mode buttons. For
more information about buttons, refer to Section 4.1.3.
Clear Inactive Alarms Select the user role that can clear audible alarms on the Alarms screen.
Reset Alarms Select the user role that can reset audible alarms on the Alarms screen.
Auto Log Out Select the user role that can configure the auto logout parameter in the
User Management screen
Interface Settings
(Shotscope NX
Interface)
Select the user role that can set the dashboard interface items on the
Network tab of the System Setup.
Table 5-3 Screen Security - Main 1 Screen (Continued)
Item Description
To Next Page
Loading...
