2. Select the default Rx preferences from the Rx Settings window.
Rx setting Rx options
Tooth ID Select the default tooth ID system:
l FDI
l ADA
l Quadrant
Shade System Select the default shade system:
l VITA Lumin
l VITApan 3D Master
l Other
Case Type Select the default case type:
l No Default
l Invisalign
l iCast
l iRecord
l Chair Side Milling
l Invisalign + iRecord
l Vivera
l Vivera Pre-Debond
l Restorative
Note: The list of available options changes according to the subscription
package.
NIRI Captures Select whether NIRI data should be disabled by default, as described in section
3.6.2.3, below.
3.
Tap to save the changes and return to the Settings window.
3.6.2.3 Disabling NIRI data capture for all scans
When patients are scanned, the NIRI data is captured by default. However, you can disable capturing the NIRI data.
In this case, none of the NIRI features will be displayed in the GUI, and NIRI data will not be captured, saved, or
sent.
iTero Element® 5D Plus User manual
© 2020 Align Technology, Inc. All rights reserved. 51
To Next Page
Loading...
