Interactive SourceMeter® Instrument Reference Manual Section 6:
2461-901-01 A/November 2015 6-39
DISPlay subsystem
This subsystem contains commands that control the front-panel display.
:DISPlay:CLEar
This command clears the text from the front-panel USER swipe screen.
Type Affected by Where saved Default value
Usage
:DISPlay:CLEar
Example
DISP:SCR SWIPE_USER
DISP:USER1:TEXT "Batch A122"
DISP:USER2:TEXT "Test running"
Clear the USER swipe screen and switch to
display the USER swipe screen.
Set the first line to read "Batch A122" and
the second line to display "Test running".
Also see
:DISPlay:USER<n>:TEXT[:DATA] (on page 6-43)
To Next Page
Loading...
