Keithley 2461 Reference Manual

Model 2461
Interactive SourceMeter® Instrument Reference Manual Section 7: Introdu
ction to TSP operation
2461-901-01 A/November 2015 7-51
Trigger model
The trigger model commands allow you to control and set the trigger model options.
trigger.model.abort() (on page 8-258)
trigger.model.getblocklist() (on page 8-258)
trigger.model.getbranchcount() (on page 8-259)
trigger.model.initiate() (on page 8-259)
trigger.model.load() — Config List (on page 8-260)
trigger.model.load() — Duration Loop (on page 8-261)
trigger.model.load() — Empty (on page 8-263)
trigger.model.load() — GradeBinning (on page 8-264)
trigger.model.load() — LogicTrigger (on page 8-266)
trigger.model.load() — LoopUntilEvent (on page 8-267)
trigger.model.load() — SimpleLoop (on page 8-270)
trigger.model.load() — SortBinning (on page 8-272)
trigger.model.setblock() — trigger.BLOCK_BRANCH_ALWAYS (on page 8-273)
trigger.model.setblock() — trigger.BLOCK_BRANCH_COUNTER (on page 8-274)
trigger.model.setblock() — trigger.BLOCK_BRANCH_DELTA (on page 8-275)
trigger.model.setblock() — trigger.BLOCK_BRANCH_LIMIT_CONSTANT (on page 8-277)
trigger.model.setblock() — trigger.BLOCK_BRANCH_LIMIT_DYNAMIC (on page 8-278)
trigger.model.setblock() — trigger.BLOCK_BRANCH_ON_EVENT (on page 8-279)
trigger.model.setblock() — trigger.BLOCK_BRANCH_ONCE (on page 8-281)
trigger.model.setblock() — trigger.BLOCK_BUFFER_CLEAR (on page 8-282)
trigger.model.setblock() — trigger.BLOCK_CONFIG_NEXT (on page 8-283)
trigger.model.setblock() — trigger.BLOCK_CONFIG_PREV (on page 8-284)
trigger.model.setblock() — trigger.BLOCK_CONFIG_RECALL (on page 8-286)
trigger.model.setblock() — trigger.BLOCK_DELAY_CONSTANT (on page 8-287)
trigger.model.setblock() — trigger.BLOCK_DELAY_DYNAMIC (on page 8-288)
trigger.model.setblock() — trigger.BLOCK_DIGITAL_IO (on page 8-289)
trigger.model.setblock() — trigger.BLOCK_DIGITIZE (on page 8-290)
trigger.model.setblock() — trigger.BLOCK_LOG_EVENT (on page 8-291)
trigger.model.setblock() — trigger.BLOCK_MEASURE (on page 8-292)
trigger.model.setblock() — trigger.BLOCK_NOP (on page 8-294)
trigger.model.setblock() — trigger.BLOCK_NOTIFY (on page 8-294)
trigger.model.setblock() — trigger.BLOCK_RESET_BRANCH_COUNT (on page 8-295)
trigger.model.setblock() — trigger.BLOCK_SOURCE_OUTPUT (on page 8-296)
trigger.model.setblock — trigger.BLOCK_SOURCE_PULSE_OUTPUT (on page 8-297)
trigger.model.setblock() — trigger.BLOCK_WAIT (on page 8-298)
trigger.model.state() (on page 8-300)

Keithley 2461 Specifications

General

Maximum Current	7 A
Power	100 W
Resolution	6.5 digits
Source Measure Unit (SMU)	Yes
DC Voltage	100 V
Maximum Voltage	100 V
Display	5-inch capacitive touchscreen
Connectivity	USB, GPIB
Software	TSP
DC Current	7 A
Current Source Range	0 to 7 A
Voltage Measurement Range	100 mV to 100 V
Current Measurement Range	10 nA to 7 A
Voltage Measurement Resolution	100 nV