Keithley 2461

Section
6: SCPI command reference Model 2461 Interactive SourceMeter® Instrument
Reference Manual
6-174 2461-901-01 A/November 2015
:TRACe:STATistics:MINimum?
This command returns the minimum reading value in the reading buffer.
Type Affected by Where saved Default value
Query only
Recall settings
Instrument reset
Power cycle
Not applicable
Not applicable
Usage
:TRACe:STATistics:MINimum?
:TRACe:STATistics:MINimum? "<bufferName>"
<bufferName>
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-
defined buffer; if no
buffer is specified,
defbuffer1
is used
Example
TRACe:STAT:MINimum?
Returns the minimum reading value in the default buffer
defbuffer1
.
TRACe:STAT:MINimum? "testData"
Returns the minimum reading value in the user-defined
buffer
testData
.
Also see
Reading buffers (on page 3-2)
Remote buffer operation (on page 3-23)
:TRACe:MAKE (on page 6-165)
:TRACe:STATistics:AVERage? (on page 6-171)
:TRACe:STATistics:CLEar (on page 6-172)
:TRACe:STATistics:MAXimum? (on page 6-173)
:TRACe:STATistics:PK2Pk? (on page 6-175)
:TRACe:STATistics:STDDev? (on page 6-175)