Interactive SourceMeter® Instrument Reference Manual Section 6:
2461-901-01 A/November 2015 6-141
:SYSTem:BEEPer[:IMMediate]
This command generates an audible tone.
Type Affected by Where saved Default value
Command only Not applicable Not applicable Not applicable
Usage
:SYSTem:BEEPer[:IMMediate] <frequency>, <duration>
The frequency of the beep (20 to 8000 Hz)
The amount of time to play the tone (0.001 to 100 s)
Details
You can use the beeper of the instrument to provide an audible signal at a specific frequency and
time duration. For example, you can use the beeper to signal the end of a lengthy sweep.
Using this function from a remote interface does not affect audible errors or key click settings that
were made from the Model 2461 front panel.
Example
Also see
None
To Next Page
Loading...
