Keithley 2461

Section
8: TSP command reference Model 2461 Interactive SourceMeter® Instrument
Reference Manual
8-152 2461-901-01 A/November 2015
smu.measure.limit[Y].audible
This attribute determines if the instrument beeper sounds when a limit test passes or fails, or disables the beeper.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes
Restore configuration
Instrument reset
Power cycle
Measure configuration list
Configuration script
Measure configuration list
smu.AUDIBLE_NONE
Usage
state = smu.measure.limit[Y].audible
smu.measure.limit[Y].audible = state
state
When the beeper sounds:
• Never: smu.AUDIBLE_NONE
• On test failure: smu.AUDIBLE_FAIL
• On test pass:
smu.AUDIBLE_PASS
Y
Limit number:
1
or
2
Details
The tone and length of beeper cannot be adjusted.
Example
See smu.measure.limit[Y].fail (on page 8-155) for an example of how to use this command.
Also see
smu.measure.limit[Y].enable (on page 8-154)