6: SCPI command reference Model 2461 Interactive SourceMeter® Instrument
6-76 2461-901-01 A/November 2015
Details
This command recalls data for one configuration index from the specified measure configuration list
and from the source configuration list (if specified).
For additional information about the information this command recalls when using a configuration list
query command, see Instrument settings stored in a measure configuration list (on page 3-33).
Example
:SENS:CONF:LIST:QUER? "MyMeasList", 2, 3
Returns the TSP commands and parameter settings that represent the settings in
configuration index 2.
Also see
Configuration lists (on page 3-30)
[:SENSe[1]]:CONFiguration:LIST:CREate (on page 6-74)
TSP command reference (on page 8-1)
[:SENSe[1]]:CONFiguration:LIST:RECall
This command recalls a configuration index in a measure configuration list and an optional source configuration
list.
Type Affected by Where saved Default value
Usage
[:SENSe[1]]:CONFiguration:LIST:RECall "<name>"
[:SENSe[1]]:CONFiguration:LIST:RECall "<name>", <index>
[:SENSe[1]]:CONFiguration:LIST:RECall "<name>", <index>, "<sourceName>"
[:SENSe[1]]:CONFiguration:LIST:RECall "<name>", <index>, "<sourceName>",
<sourceIndex>
A string that represents the name of a measure configuration list
A number that defines a specific configuration index in the measure
configuration list
A string that represents the name of a source configuration list
A number that defines a specific configuration index in the source
configuration list
To Next Page
Loading...
Need help?
General
