Keithley 2461

Section
6: SCPI command reference Model 2461 Interactive SourceMeter® Instrument
Reference Manual
6-54 2461-901-01 A/November 2015
Example 1
CURR:AVER:COUNT 10
CURR:AVER:TCON MOV
CURR:AVER ON
For current measurements, set the averaging
f
ilter type to moving average, with a filter count of
10.
Enable the averaging filter.
Example 2
RES:AVER:COUNT 10
RES:AVER:TCON MOV
RES:AVER ON
For resistance measurements, set the averaging
filter type to moving average, with a filter count of
10.
Enable the averaging filter.
Example 3
VOLT:AVER:COUNT 10
VOLT:AVER:TCON MOV
VOLT:AVER ON
For voltage measurements, set the averaging
filter type to moving average, with a filter count of
10.
Enable the averaging filter.
Also see
Filtering measurement data (on page 4-23)
[:SENSe[1]]:<function>:AVERage[:STATe] (on page 6-55)
[:SENSe[1]]:<function>:AVERage:TCONtrol (on page 6-56)