Korg Kronos - Page 108

Creating songs (Sequencer mode)
102
7. PresstheOKbutton,theselectedregionwillbe
placedintheaudiotrack.
8. Selecttheeventthatyouwanttoedit,andusethe
locationparameters“Measure”and“BeatTick”to
editthelocationoftheevent.
Youcan’tplacetwoormoreeventsatthesame
location.
9. PresstheDonebutton.
10.
PresstheSEQUENCERSTART/STOPswitch,and
makesurethattheWAVEfileplaysback.
YoucanpresstheCOMPAREswitchtoreturntothe
statepriortotheedityoujustperformed.
We’vekeptthisexamplesimple,butyoucanalso
performeditingoperationssuchaschangingthe
playbackpositionoftheWAVE fileinstepsofa
single
sample,changingthelocationrelativetoananchor
point,orcrossfadingtwoaudioevents.Formore
information,see“A u d i o AutomationEdit”onpage 641
oftheParameterGuide.