Korg Kronos - M (Master-Multisample)

Error and confirmation messages H
261
H
HD Protected
Meaning:TheinternalSSDisprotected.Tosolvethis
problem:
•OntheGlobal‐Basictab,underMemoryProtect,
turnoff(un‐check)theInternalHDDSavecheck
box.
K
KRONOS system version ... update
complete. Please restart the system.
Meaning:Thismessagewillappearwhenyouʹveused
theGlobalP0pagemenucommandUpdateSystem
Software,aftertheupdateiscomplete.Restartthe
systemtousetheupdatedsoftware.
•Turnthepowerswitchoff,andthenonagain.
M (Master–Multisample)
Master Track can’t be recorded alone
Meaning:Whenreal‐time‐recordingasingletrack,you
attemptedtobeginrecordingwiththemastertrackas
thecurrenttrack.
•SelectaMIDIorAudioTrackforrecording,instead
oftheMasterTrack.
Master Track is empty
Meaning:YoucannotopenAudioEventEditbecause
theMasterTrackisempty.Tosolvethisproblem:
•ExecutetheSequencerP4–TrackEditpagemenu
commandSetSongLengthetc.withan
appropriatelengthtocreateamastertrack,and
thenopenAudioEventEdit.
Measure number over limit
Meaning:Theattemptededitoperationwouldcause
thetracklengthtoexceed999measures.
• Deleteunnecessarymeasures.
Measure size over limit
Meaning:WhenloadingaStandardMIDIFile,the
numberofeventsinameasureexceededthemaximum
(approximately65,535events).
Meaning:Theattemptededitoperationwouldcause
themaximumnumberofeventsinameasure
(approximately65,535)tobeexceeded.
Tosolveeitheroftheseproblems:
•Useeventeditingetc.todeleteunwanteddata.
Medium changed
Meaning:WhenexecutingtheCopycommandinthe
DiskmodeUtilitypage,themediawasexchangedor
ejected,anditwasnotpossibletocopybetween
separatemediaonthesamedrive.
Medium unavailable
Meaning:Youselectedamediumthatdoesnotallow
writing.
Medium write protected
Meaning:Theotherwriting‐destinationmediais
write‐protected.
•Turnoffwriteprotectontheothermedia,and
executethecommandonceagain.
Memory full
Meaning:InSequencermodewheneditingasong,
trackorpattern,thetotaldataofallsongshasusedup
allofthesequencedatamemory,andfurthereditingis
notpossible.Tosolvethisproblem:
• Deleteothersongdataetc.toincreasetheamount
offreememory.
Meaning:Whilereal‐timerecordinginSe
que
ncer
mode,thereisnomorefreememorytoaccommodate
therecordeddata,sorecordinghasbeenforcibly
halted.Tosolvethisproblem:
• Deleteothersongdataetc.toincreasetheamount
offreememory.