Troubleshooting Drum Track
253
Drum Track
Drum Track does not start
IstheDRUMTRACKON/OFFswitchturnedon(lit)?
IstheDRUMTRACK[ON/OFF]switchblinking?
TriggerModeissettoWaitKBDTrig.Thedrumtrack
patternwillstartwhenyouplaythekeyboardor
receiveanote‐on.See“TurningtheDrumTrackonand
off”onpage 240.
Doesthecur
rentDrumTrackpatterncontaindata?If
there’snodatainthepattern,theDrumTrackwon’t
play.
Ifyou’ reinCombinationmode,istheOutputChannel
settingappropriate?See“UsingtheDrumTrackin
Combinationmode”onpage 240.
Ifyou’reinSequencermode,aretheInputChannel
andOutputChannelsettingsappropriat
e?See“Drum
TracksettingsinSequencermode”onpage 242.
IstheMIDIClockparametersetcorrectly?See“MIDI
Clocksynchronization”onpage 160.
IntheGlobalP0:BasicSetuppage,isAllKARMA/DT
Offchecked?See“GloballydisablingKARMAandthe
DrumTrack”onpage 159.
IftheDrumTrackstopswhenyouswi
tchtheKARMA
Masterscene,hav
eyoucheckedtheDTRun(Drum
TrackRun)checkboxoftheKARMAMasterscene?
Vector
Can’t control the volume
IstheEnableVo lu m eControlcheckboxchecked?
IstheCombinationorSequencermodeVJSAssign
settingappropriate?
HaveyoucheckedtheEnableProgramVec tor Volu me
checkboxsothatthevolumecontrolofaprogramcan
bereproducedinCombinationorSequencermode?
CC control does not work
IstheEnableCCControlcheckboxchecked?
AretheVJSXmodeandVJSYmodesettings
appropriate?
InCombinationorSequencermode,aretheEnable
CombiVe ct orCCorEnableSongVect orCCcheck
boxeschecked?
HaveyoucheckedtheEnableProgramVec tor CC
checkboxsothattheCCco
ntrolofaprogramcanbe
reproducedinCombinationorSequencermode?
An envelope doesn’t operate according
to its settings
Isthefrontpanelvectorjoysticksettothecenter
position?Theoperationoftheenvelopeisoffsetbythe
positionofthevectorjoystick.
•HolddowntheRESETCONTROLSbuttonand
movethevectorjoysticktoresetittothecenter.
Drum Kits
The drum sample’s pitch does not change
YouhavelefttheAssigncheckboxunchecked,and
wanttoplaythedrumsampleattheadjacentrighta
semitonelower,butthepitchdoesnotchange.
•IfyouhaveselectedadrumprograminProgram
mode,andthenwanttoeditthedrumkitinGlobal
mode,gototheProgramP2:Ed
it‐Pitch,OSC1Pitch
Mod.pageandsetPitchSlopeto+1.0beforeyou
enterGlobalmode.
Wave Sequences
The wave sequence does not advance
IstheRuncheckboxchecked?
Swing does not work properly
Isthewavesequence’sModesettoTempo?
Isthewavesequence’sSwingResolutionset
appropriately?