Korg Kronos User Manual

Error and confirmation messages D (Destination–Disk)
257
Can’t open pattern
Continue?
Meaning:Whenyoufinishedrecording,itwasnot
possibletoallocateenoughmemorytoopenthe
patternthatwasPutintothetrack.(Whenitmustbe
openedautomatically.)IfyoupresstheOKbutton,the
patterndatawillbedeleted,andtherecordedoredited
contentwillbesaved.Ifyo
upr
esstheCancelbutton,
therecordedcontentwillbediscarded.
CLIP!
Meaning:The“CLIP!”indicationwillappearifthe
signallevelexceeds0dB.
•Thesignalbeingsampledorrecordedtoanaudio
trackhasoverloaded;usetheRecordingLevel
slidertoadjustthelevel.
Note:Whenusingtheanalogaudioinputs,youwill
obtainthewidestpossibledynamicrangeifyouadjust
theMIC/L
I
NEgainselectswitchandtheLEVELknobs
ashighaspossiblewithoutallowing“A D C 
OVERLOAD!”toappear.Inaddition,youshouldset
Level(0–2a)to127,andadjustRecordingLevelas
highaspossiblewithoutallowing“CLIP!”toappear.
CLOCK ERROR!
Meaning:TheGlobalSystemClockissettoS/P DIF,
buttheclockatthedigitalinputisnotbeingdetected
correctly.
• Wheneveryouusedigitalaudioconnections,make
surethatallconnectedsystemsaresetsothatthere
isoneandonlyonewordclockmaster.Youcanset
thewordclockforth
eKRO
NOSusingtheGlobal
pageSystemClockparameter.Formore
information,see“SystemClock”onpage 756ofthe
ParameterGuide.
• Makesurethatyourexternaldeviceiscorrectly
transmittingadigitalsignal.
• Makesurethatthesamplerateoftheexternal
deviceis48kHz.
• Makesurethatthereisnoprob
lemwi
ththecable.
Completed
Meaning:Executionofthecommandendednormally.
Could not execute Capture Random
Seed, because the selected Start Seed is
assigned as an RTParam
Meaning:IftheKARMAmoduleʹs“StartSeed”
parameterhasbeenassignedasaperformance
realtimeparameter,thismessagewillappearwhen
youattempttoexecutetheCaptureRandomSeed
command;thecommandcannotbeexecuted.(Press
theOKbuttontoclosethemessage.)
•InthePerfRTPpage,canceltheperformance
realtimeparameteras
signmentforStartSeed.
D (Destination–Disk)
Destination and source are identical
Meaning:Whencopyingorbouncing,thesamesong,
trackorpatternwasselectedforboththesourceand
destination.Tosolvethisproblem:
•Selectadifferentsong,track,orpatternforthe
sourceanddestination.
Destination from-measure within the
limits of source
Meaning:WhenexecutingtheMoveMeasure
commandforalltracksorwithinthesametrack,the
specifieddestinationmeasureiswithinthesource
range.Tosolvethisproblem:
•Setadestinationmeasurethatisoutsideofthe
sourcerange.
Destination is empty
Meaning:Whenediting,thetrackorpatternthatwas
specifiedasthedestinationcontainsnomusicaldata.
Tosolvethisproblem:
•Selectatrackorpatternthatcontainsmusicaldata.
Destination measure is empty
Meaning:Themeasurethatwasspecifiedasthe
destinationcontainsnodata.
•Specifyadestinationmeasurethatcontainsdata.
Destination multisample already exists
Meaning:Amultisamplealreadyexistsatthe
destination(savelocation)multisample.
•Eitherdeletethemultisampleatthedestination
(savelocation),orchangethesavedestination
multisamplenumber.
Destination multisample and source
multisample are identical
Meaning:Thesamemultisampleisselectedforthe
sourceanddestination.
•Selectdifferentmultisamplesforthesourceand
destination.
Destination sample already exists
Meaning:Asamplealreadyexistsatthedestination
(savelocation).

Korg Kronos Specifications

Operating Environment

operating temperature range	+5 – +35 °C

Power

power consumption	60 W

Weight and Dimensions

dimensions (61 keys)	1052 x 362 x 134 mm
dimensions (73 keys)	1243 x 411 x 145 mm
dimensions (88 keys)	1455 x 411 x 145 mm
weight (61 keys)	12.5 kg
weight (73 keys)	20.3 kg
weight (88 keys)	23.0 kg