Korg Kronos - Error and confirmation messages

Appendices
250
changetheprogrambankforeachtimbreofa
combination.Formoreinformation,see“Changeall
bankreferences”onpage 807oftheParameter
Guide.
Can’t write a Program
Youcan’twriteHD‐1programsintobankUSER‐A.
Conversely,youcan’twriteEXiprogramsintobanks
USER‐B–F.HoweverforbanksUSER‐A–G,youcanuse
theGlobalmodepagemenucommandSetProgram
User‐BankTypetochangethetypeofeachbank,so
thatitwillaccommodatethedesiredtypeofprograms.
Formoreinformation,see“ChangingtheBankType
forUSERbanks”onpage 27.
Songs
Song does not play correctly after being
loaded
Inthedialogboxwhenyousavedthedata,didyou
checkalloftheitemsthatyouwantedtosave?
AretheProgramsusedbytheSongthesameaswhen
thesongwascreated?
•IfyouhaveswitchedProgrambanks,youcanuse
thepagemenucommandChangeallbank
r
e
ferencestochangetheProgrambankforeach
trackofaSong.Formoreinformation,see“Change
allbankreferences”onpage 807oftheParameter
Guide.
•Whensavingthesong,itisbesttouseSaveAllor
SavePCG&SEQsothattheprogramsaresaved
togetherwiththesong.Thenwhenloading,load
boththe.PCGandthe.SEQdata.
Haveyouloadedthemultisamplesandsamplesused
bytheprogram?
Audio tracks don’t play
TheaudiofilesfortheSongmustbestoredwithina
directoryatthesamedirectorylevelasthe.SNGfile,
andthatdirectorymustbehavethesamenameasthe
.SNGfile,followedby“_A”(for“Audio”).For
instance,ifthe.SNGfileisnamedWAMOZART.SNG,
itsaudiofoldermu
stbenamedW
AMOZART_A.If
youmoveorrenamethe.SNGfile,makesuretomove
orrenamethemainaudiofolderaswell.
IfthefoldercontainingtheWAVEfilesforthesongyou
loadedhasthewrongname,theiconisshowningray.
Couldyouhavemovedorrenamedthefolder?
Loading OASYS-format Songs
TheKRONOScanplaySongscreatedontheKorg
OASYS.However,thenameoftheaudiodirectorywill
needtobechangedslightly.
OASYSfileswerelimitedto8characters,andsothe
nameoftheaudiofiledirectorywastypically
abbreviated.Forinstance,ifthe.SNGfilewasnamed
WAMOZART. SNG, theOASYSaudiofo
lderwouldbe
namedWAMOZA_A.
BeforeyouloadanOASYS.SNGfile,editthenameof
thedirectorysothatitmatchestheKRONOSstandard:
thesamenameasthe.SNGfile,followedby“_A”(for
“Audio”).Inthecaseabove,you’drename
“WAMOZA_A”to“WAMOZART_A.”
Playback does not start when you press
the SEQUENCER START/STOP switch
IstheMIDIClock(GlobalP1:MIDI)settoInternalor
Auto?
Can’t record in Sequencer mode
DidyouuseTrackSelecttoselecttheMIDItrackor
audiotrackthatyouwanttorecord?
IstheMemoryProtectSongcheckbox(GlobalP0)
unchecked?
IstheMIDIClock(GlobalP1:MIDI)settoInternalor
Auto?
EXi programs don’t play correctly in a
Song.
DoestheTrack’snumberhaveagraybackground
color,insteadofblue?And,does[Inactive]appearafter
theProgramnameintheSelectedTrackInfo?
•TheProgramsintheSongareaskingformorethan
themaximumavailableEXifixedresources.
RemoveoneormoreoftheEXiProgramswhich
usesfixe
dresources.
Formoreinformation,see“CX‐3&otherEXi:
LimitationsonEXifixedresources”onpage 420of
theParameterGuide.
KARMA doesn’t record properly after
using “Copy From Combi”
IsMultiREC(SequencerP0:Play/REC)checked?
ArethesettingsintheCopyFromCombinationdialog
boxcorrect?
•IntheCopyFromCombinationdialogbox,check
theMultiRECstandbyoptionbeforeyouexecute
thecopy.Thiswillcausethesettingstobeadjusted
automatically.
Can’t record your performance using
Tone Adjust
ChangesyoumakeusingToneAdjustarerecordedas
systemexclusivedata.DidyouchecktheGlobalmode
MIDIFilterEnableExclusivecheckbox?