Korg Kronos - Effects selection and routing

Loading & saving data, and creating CDs
196
toaddalltheWAVEfilesinthedirectory,pressthe
InsertAllbutton.
Note:IfyouchecktheMultipleSelectoption,you’ll
beabletoselectmultipleWAVEfilesandinsert
theminasingleoperation.
Whenyouhavefinishedaddingfilestothelist,
presstheExitbuttontoclosethedialogbox.
NoticethattheWAVEfileshavebeenaddedtothe
tracklist.
YoucanalsousethePlaybuttontoplayany44.1kHz
or48kHzWAVEfile.
ToaddotherWAVEfilestothetracklist,pressthe
Insertbuttononceagain.
Ifyouwanttoaddanothertrack,selecttheWA
VEfile
thatfollowsthetrackyouwanttoadd.Ifyouwantto
addthetracktotheendofthetracklist,select
“====End====.”ThenpresstheInsertbutton.
TodeleteaWAVEfilefromthetracklist,selectthe
WAVEfilethatyouwanttodelete,andpresstheCu
t
button.Subs
equenttrackswillbemovedforwardin
thelist.
Note:Formoredetailsonothereditingoperations,
pleasesee“1–1c:DriveSelect,Commandbuttons”on
page 824oftheParameterGuide,and“SwapTrack”
onpage 854oftheParameterGuide.
4. InsertablankCD‐RorCD‐RWdis
kintothedr
ive.
IntheMakeAudioCDpage,useDriveSelecttoselect
theexternalUSBCD‐R/RWdrive.TheCD‐R/RWdrive
isshownas“CDD:BlankDisc.”
AnaudioCDcannotbecreatedonadiscthat
containsdataotherthanaudio(e.g.,files).Inthis
case,itwillnotbepossibletose
lec
tthemenu
commandsWritetoCDorFinalizeAudioCD.
Note:SincesomeaudioCDplayersareunabletoplay
backCD‐RWmedia,werecommendthatyouuseCD‐
RmediaforaudioCDs.
5. SelectthemenucommandWritetoCDtoopenthe
dia
logbox,andspecifyhowtheCDwillbe
written.
UseSpeedtosetthewritingspeed.Thiswillindicate
thespeedssupportedbytheCD‐R/RWdriveyouare
using.Inthisexample,settheSpeedtothelowest
valueavailable(suchas1x).
Insomecases,fasterspeedsmaycau
sewriteerrors.
Us
eModetospecifythewritingmethod.
Note:Dependingonthedriveyouareusing,itmaynot
bepossibletowriteatthespecifiedspeed.We
recommendthatthefirsttimeyouwrite,youselect
Testtoperformawritingtestinordertodeterminethe
speedcapabilitiesofyo
urdrive.Testwillnotwrite
datatotheCD‐R/RWmedia,butwillperformallother
processingjustaswhendataisactuallywritten.Ifan
erroroccurs,thedisplaywillshowthemessage“Error
inwritingtomedium.”
PresstheOKbuttontoexecutethewritingtest.
Afterve
rifyingthatdatacanbewrittencorrectlyatthe
specifiedspeed,selectWrite.
ExecutefinalizetoospecifieswhetherFinalizationwill
beexecutedaftertheaudiotrackshavebeenwrittento
theCD‐R/RWmedia.Iffinalizationhasbeenexecuted,
thedisccanbeplayedbackonaCDplayer,butitwill
nolo
ngerbepossibletoaddmoretracks.
Note:Ifyouonlywanttoexecutefinalization,usethe
FinalizeAudioCDcommand.
6. WhenyouarereadytowritetotheCD‐R/RW
media,ortoexecuteawritingtest,presstheOK
button.Tocancelwithoutexecuting,pressthe
Cancelbutton.
Whenyo
upresstheOKbutton,the“Obey
CopyrightRules”dialogboxwillappear.
7. Carefullyread“COPYRIGHTWARNING”on
page 3oftheQuickStartGuide,andifyou
consenttotheterms,presstheOKbuttontobegin
burningtheCD.Ifyoudonotconsenttotheterms,
presstheCancelbu
ttontocan
celtheoperation.
Inordertoavoiderrors,donotsubjectthedriveto
physicalshockorvibrationwhileCD‐R/RWmedia
isbeingwritten.
Saving Track Lists
Thetracklistwillbelostwhenthepoweristurnedoff.
Ifyouwanttokeepthisdata,youmustsaveit.
1. IntheSavepage,selectthedirectoryinwhichyou
wanttosavethetracklist.
2. Selectthepagemenucommand“SaveAudioCD
TrackList”toopenthedialogbo
x.
3. PresstheOKbuttontosavethedata,orpressthe
Cancelbuttontocancelwithoutsaving.