Korg Kronos - Page 269

Error and confirmation messages N (No data–Not enough song memory)
263
Not enough Drum Track pattern
locations available
Meaning:Whenconvertingasongʹsuserpatternsto
userdrumtrackpatterns,theallowablenumberofuser
drumtrackpatternswasexceeded.Tosolvethis
problem:
•Asnecessary,usetheDiskmodeSavePCG
commandtosavetheuserdrumtrackpatterns.
TheninSequencermode,usetheEraseDrum
TrackPatt
ernmenucommandtofreeupmore
drumtrackuserpatterns.Afterthat,trythe
conversionagain.
Not enough Drum Track pattern memory
Meaning:Whenconvertingasongʹsuserpatternsto
userdrumtrackpatterns,therewasnotenoughfree
memory.Tosolvethisproblem:
•Asnecessary,usetheMediamodeSavePCG
commandtosavetheuserdrumtrackpatterns.
TheninSequencermode,usetheEraseDrum
TrackPatternmenucommandtode
letetheother
userdrumtrackpatternstofreeupmorememory.
Afterthat,trytheconversionagain.
Not enough empty slot to copy
Meaning:Thismessagewillappearwhenyouexecute
CopyInsertEffectorCopyFromProgramifthereare
notenoughvacantinserteffectsinthecopy‐
destination.Tosolvethisproblem:
•Setunusedinserteffectsinthecopy‐destinationto
000:NoEffectsothattherewillbeenoughvacant
inserteffects.
Not enough memory
Meaning:Whenstartingreal‐timerecordingin
Sequencermode,theminimumamountoffree
memory(suchasmemoryfortheBAReventsuptothe
recordingstartlocation)couldnotbeallocated.To
solvethisproblem:
• Deleteothersongdataetc.toincreasetheamount
offreememory.
Meaning:Whenexecuting“LoadEx
clusive,”you
attemptedtoloadan.EXLfilethatrequiredmorethan
1,048,576bytes.Suchafilecannotbeloadedbythe
KRONOS.
Meaning:WheninDiskmodeyouattemptedtoload
anEXLfilefrommediaotherthantheinternaldisk,
memoryfortemporaryusecouldnotbeallocatedon
theinte
rnaldisk.
Tosolveeitheroftheseproblems:
•Ontheinternaldisk,createfreespacethatislarger
thanthe.EXLfile.
Not enough memory to load
Meaning:Whenyouattemptedtoloada.SNGfileora
standardMIDIfileinDiskmode,therewasinsufficient
freememoryinthesequencememory.Tosolvethis
problem:
• Deleteothersongdataetc.toincreasetheamount
offreememory.
Not enough memory to open pattern
Meaning:Therewasinsufficientsequencermemoryto
openthepattern,soeditingisnotpossible.
•Eitherdeleteunwanteddatasuchasasong,track,
orpattern,ordonotopenthepattern.
Not enough multisample memory
Meaning:Thereisinsufficientmultisamplememory.
(Thenumberofmultisampleswouldexceedthe
maximumof4,000.)Tosolvethisproblem:
• Deletemultisamplestoincreasetheamountoffree
memory.
Not enough pattern locations available
Meaning:WhenusingtheLoadDrumTrackPattern
command,youattemptedtoloadmorethanthe
remainingnumberofuserpatternsintheselected
song.Tosolvethisproblem:
• Createanewsong,andreloadthepatternsinto
userpatternsofthenewsong.Youcanloadupto
100userpatternsforeachso
ng.Ifyouneedtoload
morethanthisnumberofdrumtracksorpatterns,
youcandistributethembetweentwoormore
songs.
Meaning:WhenusingAutoSongSetup,the newsong
couldnotbeautomaticallycreatedbecausetherewas
nosongwiththeinitialsettings.Ifyo
uexecutedthe
GlobalmodeChangeallbankreferencescommandon
thesong,allsongswilldifferfromtheinitialsettings,
causingthesystemtodeterminethatthereisnosong
withtheinitialsettings.
Not enough region locations available
Meaning:Theallowablenumberofregionswas
exceededduringrealtime‐recording,orwhenyou
attemptedtoloadanentireSNGfile,1Song,orTracks
withregionsbeingappended.
•InSequencerP4–TrackEdit,selecttheaudiotrack
andusethepagemenucommandRegionEditto
createenoughvacantspacefollowingthelas
t
regionsothattheallowablenumberofregionswill
notbeexceeded.Thentrytheoperationagain.
Not enough relative parameter memory
Meaning:Thereisinsufficientmemoryforrelative
parameters.(Thenumberofsamplesinthe
multisampleswouldexceedthemaximumof16,000.)
• Deletemultisamplesorindicesofmultisamplesto
increasetheamountoffreememory.