98 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
7 How to Work with the Analyser
7.5 Status Screen LAR | PROCESS ANALYSERS AG
Warning
Operating error with remote control!
If the remote control is deactivated, no status "On" / "Off" is displayed.
If the remote control is activated, the status "Off" is displayed until a signal is
present ("On").
If the actual data differs too much from the target specifications, contact the
technical support of LAR(Chapter 15.1 on page 283).
Notice
This view supports the Export function (Chapter 7.14.2 on page 156).
!
i
To Next Page
Loading...