12E5119 Instruction Manual QuickTOC
®
ultra
IECEx 239
9 Accessories and Options
9.9 Multi Parameter Option
LAR | PROCESS ANALYSERS AG
9.9 Multi Parameter Option
The analyser may measure multiple parameters with single sample streams. This can be factory-set or
be upgraded later.
The analyser can be fitted with up to four detectors for this option. The parameters can also be set for
every sample stream and channel.
The parameters can be measured are:
• TOC = Total Organic Carbon
• TIC = Total Inorganic Carbon
• TC = Total Carbon (TOC + TIC)
• COD = Chemical Oxygen Demand
• TN
b
= Total Nitrogen bound
Notice
Please contact the Sales Department of LAR if you are interested in upgrad-
ing to this option (Chapter 15 on page 283).
i
To Next Page
Loading...