LAR Process Analysers QuickTOC ultra - Auto-TIC-Port; Construction of the TIC Reactor with Auto-TIC-Port; Start-Up of the TIC Reactor with Auto-TIC-Port

To Next Page

To Previous Page

12E5119 Instruction Manual QuickTOC

ultra

IECEx 241

9 Accessories and Options

9.11 Auto-TIC-Port

LAR | PROCESS ANALYSERS AG

9.11 Auto-TIC-Port

An Auto-TIC-Port considerably reduces the efforts for care and maintenance work of the analyser.

The injection by the Auto-TIC-Port is effected automatically by a mechanical motor which can open and

close the injection channel (similiar to the injection port on the furnace head).

The benefits here are increased level of sealing which will result in increased measurement accuracy

and less maintenance.

9.11.1 Construction of the TIC Reactor with Auto-TIC-Port

9.11.2 Start-Up of the TIC Reactor with Auto-TIC-Port

If ordered, the TIC reactor with Auto-TIC-Port is delivered with the analyser preconfigured by the manu-

facturer.

Fig. 152: TIC Reactor with Auto-TIC-Port

Notice

If you want to add this option to an existing analyser, please contact your local part-

ner or the Technical Support of LAR (Chapter 15 on page 283).

1 TIC reactor with Auto-TIC-Port

2 Auto-TIC-Port

3 TIC stripping vessel

4 Tube connections