LAR Process Analysers QuickTOC ultra - Care Log (Analyser)

268 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
13 Operating, Care and Maintenance Logs
13.3 Care Log (Analyser) LAR | PROCESS ANALYSERS AG
13.3 Care Log (Analyser)
Interval Action Done Comment
If
necessary
1 Week
Rinse the Injection System

Clean Glass Components

Fill Canisters

Clean Canisters

Clean Supply Tubes

Clean Inlet and Drain Tubes

Clean Teflon Tube (Reactor Foot)

Clean Reactor Foot

Clean Injection Tube

Clean Reactor Pipe

Clean TIC Stripping Vessel

Clean Gas Cooling Pipe

Clean Running Rails (XY-System)

Grease Running Rails (XY-System)

Clean Tube Cassette Pump and Pump
Cassettes

Clean Sample Pump

Adjust Sample Pump

Clean Viton Tube

Clean Injection Needle

Renew Calibration Standard

1 Month Clean Needle Guide (Injection Port)

3 Months
Check the Furnace System

Check the Gas Cooling Pipes

Clean and oil the Injection Port

Move Pump Tubes (Tube Cassette Pump)

Check the mechanical backlash of the XY-
System

6 Months Check the Injection Port

Date: Signature: