240 Instruction Manual QuickTOC
®
ultra
IECEx 12E5119
9 Accessories and Options
9.10 High Salt Option LAR | PROCESS ANALYSERS AG
9.10 High Salt Option
In contrast to many other analysers the QuickTOC
®
ultra
can also work with salt loads up to 10 g/l without
problem, even up to 300 g/l cooking salt (NaCl) with the high salt option available additionally. This
means that the sample needs not be diluted, not even for the highest salt concentrations. This in turn
has a positive effect on the accuracy of measurement results.
When fitting the high salt option, you have instead of a standard reactor foot a high salt reactor foot -
which can be screwed off and is used for quick removal of salt residues. Also, the analyser has instead
of a standard reactor pipe a high salt reactor pipe which has a larger taper so that the salt residues do
not block the reactor pipe.
Notice
If you have any question, please contact the Sales Department of LAR
(Chapter 15 on page 283).
i
To Next Page
Loading...